1932

Abstract

Abstract

Use of infrared detector arrays in astronomy began roughly 20 years ago, and our detection capabilities in parts of this spectral range have doubled about every seven months since then. A variety of approaches are now used for detector arrays operating from 1 μm to 1 mm and beyond. They include direct hybrid arrays of InSb and HgCdTe photodiodes that operate from 0.6 μm to 5 μm, and of Si:As impurity band conduction detectors from 5 μm to 28 μm; a number of approaches to photoconductive detector arrays in the far-infrared; and bolometer arrays read out by transistors or superconducting devices in the far-infrared through millimeter-wave spectral range. The underlying principles behind these approaches are discussed. The application of these principles is illustrated through detailed discussion of a number of state-of-the-art detector arrays.

Loading

Article metrics loading...

/content/journals/10.1146/annurev.astro.44.051905.092436
2007-09-22
2024-03-28
Loading full text...

Full text loading...

/content/journals/10.1146/annurev.astro.44.051905.092436
Loading
/content/journals/10.1146/annurev.astro.44.051905.092436
Loading

Data & Media loading...

  • Article Type: Review Article
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error