The Fluid Mechanics of Cleaning and Decontamination of Surfaces

Literature Cited

1. Alba K, Frigaard IA. 2016. Dynamics of the removal of viscoplastic fluids from inclined pipes. J. Non-Newton. Fluid Mech. 229:43–58
   [Google Scholar]
2. Ali SZ, Dey S. 2019. Bed particle saltation in turbulent wall-shear flow: a review. Proc. R. Soc. A 475:20180824
   [Google Scholar]
3. Anderson DM, Guba P. 2020. Convective phenomena in mushy layers. Annu. Rev. Fluid Mech. 52:93–119
   [Google Scholar]
4. Aouad W, Landel JR, Davidson JF, Dalziel SB, Wilson DI 2016. Particle image velocimetry and modelling of horizontal coherent liquid jets impinging on and draining down a vertical wall. Exp. Therm. Fluid Sci. 74:429–43
   [Google Scholar]
5. Balmforth NJ, Frigaard IA, Ovarlez G 2014. Yielding to stress: recent developments in viscoplastic fluid mechanics. Annu. Rev. Fluid Mech. 46:121–46
   [Google Scholar]
6. Basu S, Nandakumar K, Masliyah JH 1997. A model for detachment of a partially wetting drop from a solid surface by shear flow. J. Colloid Interface Sci. 190:253–57
   [Google Scholar]
7. Bejan A. 2013. Convection Heat Transfer Hoboken, NJ: Wiley. , 4th ed..
8. Bhagat RK, Jha NK, Linden PF, Wilson DI 2018. On the origin of the hydraulic jump in a thin liquid film. J. Fluid Mech. 851:R5
   [Google Scholar]
9. Bhagat RK, Wilson DI. 2016. Flow in the thin film created by a coherent turbulent water jet impinging on a vertical wall. Chem. Eng. Sci. 152:606–23
   [Google Scholar]
10. Bird RB, Stewart WE, Lightfoot EN 2002. Transport Phenomena Hoboken, NJ: Wiley. , 2nd ed..
11. Bird RB, Wiest JM. 1995. Constitutive equations for polymeric liquids. Annu. Rev. Fluid Mech. 27:169–93
    [Google Scholar]
12. Bonn D, Eggers J, Indekeu J, Meunier J, Rolley E 2009. Wetting and spreading. Rev. Mod. Phys. 81:739–805
    [Google Scholar]
13. Boomkamp PAM, Miesen RHM. 1996. Classification of instabilities in parallel two-phase flow. Int. J. Multiph. Flow 22(Suppl.):67–88
    [Google Scholar]
14. Bouklas N, Huang R. 2012. Swelling kinetics of polymer gels: comparison of linear and nonlinear theories. Soft Matter 8:8194–203
    [Google Scholar]
15. Boulbene B, Morchain J, Bonin MM, Janel S, Lafont H, Schmitz P 2012. A combined computational fluid dynamics (CFD) and experimental approach to quantify the adhesion force of bacterial cells attached to a plane surface. AIChE J 58:3614–24
    [Google Scholar]
16. Carniello V, Peterson BW, van der Mei HC, Busscher J 2018. Physico-chemistry from initial bacterial adhesion to surface-programmed biofilm growth. Adv. Colloid Interface Sci. 261:1–14
    [Google Scholar]
17. Carroll BJ. 1981. The kinetics of solubilization of nonpolar oils by nonionic surfactant solutions. J. Colloid Interface Sci. 79:126–35
    [Google Scholar]
18. Carroll BJ. 1993. Physical aspects of detergency. Colloids Surf. A 74:131–67
    [Google Scholar]
19. Chang HC. 1994. Wave evolution on a falling film. Annu. Rev. Fluid Mech. 26:103–36
    [Google Scholar]
20. Chang K, Constantinescu G, Park SO 2018. Analysis of the flow and mass transfer processes for the incompressible flow past an open cavity with a laminar and a fully turbulent incoming boundary layer. J. Fluid Mech. 561:113–45
    [Google Scholar]
21. Chee MWL, Ahuja TV, Bhagat RK, Taesopapong N, Wan SA et al. 2019. Impinging jet cleaning of tank walls: effect of jet length and wall curvature on cleaning of tank walls. Food Bioprod. Process. 113:142–53
    [Google Scholar]
22. Chen S, Bertola V. 2017. Morphology of viscoplastic drop impact on viscoplastic surfaces. Soft Matter 13:711–19
    [Google Scholar]
23. Craster RV, Matar OK. 2009. Dynamics and stability of thin liquid films. Rev. Mod. Phys. 81:1131–98
    [Google Scholar]
24. Cutler WG, Kissa A 1986. Detergency: Theory and Technology New York: Marcel Dekker
25. Dalwadi MP, O'Kiely D, Thomson SJ, Khaleque TS, Hall CL 2017. Mathematical modeling of chemical agent removal by reaction with an immiscible cleanser. SIAM J. Appl. Math. 77:1937–61
    [Google Scholar]
26. Dimitrakopoulos P, Higdon JJL. 1997. Displacement of fluid droplets from solid surfaces in low-Reynolds-number shear flows. J. Fluid Mech. 336:351–78
    [Google Scholar]
27. d'Olce M, Martin J, Rakotomalala N, Salin D, Talon L 2008. Pearl and mushroom instability patterns in two miscible fluids' core annular flows. Phys. Fluids 20:024104
    [Google Scholar]
28. Douay CL, Faure TM, Lusseyran F 2013. Stereoscopic PIV using optical flow: application to a cavity recirculation. Exp. Fluids 54:1579
    [Google Scholar]
29. Dussan V. EB. 1979. On the spreading of liquids on solid surfaces: static and dynamic contact lines. Annu. Rev. Fluid Mech. 11:371–400
    [Google Scholar]
30. Dussan V. EB. 1987. On the ability of drops to stick to surfaces of solids. Part 3. The influences of the motion of the surrounding fluid on dislodging drops. J. Fluid Mech. 174:381–97
    [Google Scholar]
31. Eggers J. 1997. Nonlinear dynamics and breakup of free-surface flows. Rev. Mod. Phys. 69:865–929
    [Google Scholar]
32. Etzold MA, Landel JR, Dalziel SB 2020. Three-dimensional advective–diffusive boundary layers in open channels with parallel and inclined walls. Int. J. Heat Mass Transf. 153:119504
    [Google Scholar]
33. Fang LC. 2003. Effect of mixed convection on transient hydrodynamic removal of a contaminant from a cavity. Int. J. Heat Mass Transf. 46:2039–49
    [Google Scholar]
34. Fogler HS. 2020. Elements of Chemical Reaction Engineering Boston: Prentice Hall. , 5th ed..
35. Fryer PJ, Asteriadou K. 2009. A prototype cleaning map: a classification of industrial cleaning processes. Trends Food Sci. Technol. 20:255–62
    [Google Scholar]
36. Gaver DP, Kute SM. 1998. A theoretical model study of the influence of fluid stresses on a cell adhering to a microchannel wall. Biophys. J. 75:721–33
    [Google Scholar]
37. Gekas V, Hallström B. 1987. Mass transfer in the membrane concentration polarization layer under turbulent cross flow: I. Critical literature review and adaptation of existing Sherwood correlations to membrane operations. J. Membr. Sci. 30:153–70
    [Google Scholar]
38. Glover HW, Brass T, Bhagat RK, Davidson JF, Pratt L, Wilson DI 2016. Cleaning of complex soil layers on vertical walls by fixed and moving impinging liquid jets. J. Food Eng. 178:95–109
    [Google Scholar]
39. Gorokhovski M, Herrmann M. 2008. Modeling primary atomization. Annu. Rev. Fluid. Mech. 40:343–66
    [Google Scholar]
40. Graetz L. 1885. Über die Wärmeleitungsfähigkeit von Flüssigkeiten. Ann. Phys. 261:337–57
    [Google Scholar]
41. Guha A. 2008. Transport and deposition of particles in turbulent and laminar flow. Annu. Rev. Fluid. Mech. 40:343–66
    [Google Scholar]
42. Guha A, Barron RM, Balachandar R 2011. An experimental and numerical study of water jet cleaning process. J. Mater. Process. Technol. 211:610–18
    [Google Scholar]
43. Gupta AK, Basu S. 2008. Deformation of an oil droplet on a solid substrate in simple shear flow. Chem. Eng. Sci. 63:5496–502
    [Google Scholar]
44. Hanratty TJ. 1981. Stability of surfaces that are dissolving or being formed by convective diffusion. Annu. Rev. Fluid Mech. 13:231–52
    [Google Scholar]
45. Hartley DE, Murgatroyd W. 1964. Criteria for the break-up of thin liquid layers flowing isothermally over solid surfaces. Int. J. Heat Mass Transf. 7:1003–15
    [Google Scholar]
46. Hassan G, Yilbas BS, Al-Sharafi A, Al-Qahtan H 2019. Self-cleaning of a hydrophobic surface by a rolling water droplet. Sci. Rep. 9:5744
    [Google Scholar]
47. Higdon JJL. 1985. Stokes flow in arbitrary two-dimensional domains: shear flow over ridges and cavities. J. Fluid Mech. 159:195–226
    [Google Scholar]
48. Homsy GM. 1987. Viscous fingering in porous media. Annu. Rev. Fluid Mech. 19:271–311
    [Google Scholar]
49. Horner M, Metcalfe G, Wiggins S, Ottino JM 2002. Transport enhancement mechanisms in open cavities. J. Fluid Mech. 452:199–229
    [Google Scholar]
50. Hsu TT, Walker TW, Frank CW, Fuller GG 2011. Role of fluid elasticity on the dynamics of rinsing flow by an impinging jet. Phys. Fluids 23:033101
    [Google Scholar]
51. Hu H, Argyropoulos SA. 1996. Mathematical modelling of solidification and melting: a review. Model. Simul. Mater. Sci. Eng. 4:371–39
    [Google Scholar]
52. Hubbe MA. 1994. Theory of detachment of colloidal particles from flat surfaces exposed to flow. Colloids Surf 12:151–78
    [Google Scholar]
53. Hunek B, Cussler EL. 2002. Mechanisms of photoresist dissolution. AIChE J. 48:661–72
    [Google Scholar]
54. Israelachvili JN. 2011. Intermolecular and Surface Forces San Diego, CA: Academic. , 3rd ed..
55. Jameson GJ, Jenkins CE, Button EC, Sader JE 2010. Water bells formed on the underside of a horizontal plate. Part 1. Experimental investigation. J. Fluid Mech. 649:19–43
    [Google Scholar]
56. Jana S, Ray S, Durst F 2007. A numerical method to compute solidification and melting processes. Appl. Math. Model. 31:93–119
    [Google Scholar]
57. Joseph DD, Bai R, Chen KP, Renardy YY 1997. Core-annular flows. Annu. Rev. Fluid Mech. 29:65–90
    [Google Scholar]
58. Jung S, Hutchings IM. 2012. The impact and spreading of a small liquid drop on a non-porous substrate over an extended time scale. Soft Matter 8:2686–96
    [Google Scholar]
59. Kahler DM, Kabala Z. 2016. Acceleration of groundwater remediation by deep sweeps and vortex ejections induced by rapidly pulsed pumping. Water Resour. Res. 52:3930–40
    [Google Scholar]
60. Kibar A, Karaby H, Yigit KS, Ucar IO, Erbil HY 2010. Experimental investigation of inclined liquid water jet flow onto vertically located superhydrophobic surfaces. Exp. Fluids 49:1135–45
    [Google Scholar]
61. Kim JY, Hwang IG, Weon BM 2017. Evaporation of inclined water droplets. Sci. Rep. 7:42848
    [Google Scholar]
62. Kondo T, Ando K. 2019. Simulation of high-speed droplet impact against a dry/wet rigid wall for understanding the mechanism of liquid jet cleaning. Phys. Fluids 31:013303
    [Google Scholar]
63. Landel JR, McEvoy H, Dalziel SB 2015. Cleaning of viscous drops on a flat inclined surface using gravity-driven film flows. Food Bioprod. Process. 93:310–17
    [Google Scholar]
64. Landel JR, Thomas AL, McEvoy H, Dalziel SB 2016. Convective mass transfer from a submerged drop in a thin falling film. J. Fluid Mech. 789:630–68
    [Google Scholar]
65. Le Grand N, Daerr A, Limat L 2005. Shape and motion of drops sliding down an inclined plane. J. Fluid Mech. 541:293–315
    [Google Scholar]
66. Li D, Kang Y, Ding X, Liu W 2017. Effects of the geometry of impinging surface on the pressure oscillations of self-resonating pulsed waterjet. Adv. Mech. Eng. 9: https://doi.org/10.1177/1687814017720081
    [Crossref] [Google Scholar]
67. Lin SP, Reitz RD. 1998. Drop and spray formation from a liquid jet. Annu. Rev. Fluid Mech. 30:85–105
    [Google Scholar]
68. Mabrouki T, Raissi K, Cornier A 2000. Numerical simulation and experimental study of the interaction between a pure high-velocity waterjet and targets: contribution to investigate the decoating process. Wear 239:260–73
    [Google Scholar]
69. Mackay DM, Wilson RD, Brown MJ, Ball WP, Xia G, Durfee DP 2000. A controlled field evaluation of continuous versus pulsed pump-and-treat remediation of a VOC-contaminated aquifer: site characterization, experimental setup, and overview of results. J. Contam. Hydrol. 41:81–131
    [Google Scholar]
70. Markl D, Yassin S, Wilson DI, Goodwin DJ, Anderson A, Zeitler JA 2017. Mathematical modelling of liquid transport in swelling pharmaceutical immediate release powder compacts. Int. J. Pharm. 526:1–10
    [Google Scholar]
71. Melo LF, Bott TR. 1997. Biofouling in water systems. Exp. Therm. Fluid Sci. 14:375–81
    [Google Scholar]
72. Mertens K, Putkaradze V, Vorobieff P 2005. Morphology of a stream flowing down an inclined plane. Part 1. Braiding. J. Fluid Mech. 531:49–58
    [Google Scholar]
73. Miller-Chou BA, Koenig JL. 2003. A review of polymer dissolution. Prog. Polym. Sci. 28:1223–70
    [Google Scholar]
74. Mitchell BR, Klewicki JC, Korkolis YP, Kinsey BL 2019. Normal impact force of Rayleigh jets. Phys. Rev. Fluids 4:113603
    [Google Scholar]
75. Moffatt HK. 1964. Viscous and resistive eddies near a sharp corner. J. Fluid Mech. 18:1–18
    [Google Scholar]
76. Moran JL, Posner JD. 2017. Phoretic self-propulsion. Annu. Rev. Fluid Mech. 49:511–40
    [Google Scholar]
77. Morgan RG, Ibarra R, Zadrazil I, Matar OK, Hewitt GF, Markides CN 2017. On the role of buoyancy-driven instabilities in horizontal liquid–liquid flow. Int. J. Multiph. Flow 89:123–35
    [Google Scholar]
78. Nasr B, Ahmadi G, Ferro AR, Dhaniyala S 1994. A model for particle removal from surfaces with large-scale roughness in turbulent flows. Aerosol Sci. Technol. 54:291–303
    [Google Scholar]
79. Nishimura T, Kunitsugu K. 1997. Fluid mixing and mass transfer in two-dimensional cavities with time-periodic lid velocity. Int. J. Heat Fluid Flow 18:497–506
    [Google Scholar]
80. NRC (Natl. Res. Counc.). 1994. Alternatives for Ground Water Cleanup Washington, DC: Natl. Acad. Press
81. Payatakes AC. 1982. Dynamics of oil ganglia during immiscible displacement in water-wet porous media. Annu. Rev. Fluid Mech. 14:365–93
    [Google Scholar]
82. Perazzo CA, Gratton JS. 2004. Navier–Stokes solutions for parallel flow in rivulets on an inclined plane. J. Fluid Mech. 507:367–79
    [Google Scholar]
83. Pozrikidis C. 1997. Shear flow over a protuberance on a plane wall. J. Eng. Math. 31:29–42
    [Google Scholar]
84. Prosperetti A. 1979. Boundary conditions at a liquid–vapor interface. Meccanica 14:34–47
    [Google Scholar]
85. Prosser AJ, Franses EI. 2001. Adsorption and surface tension of ionic surfactants at the air–water interface: review and evaluation of equilibrium models. Colloids Surf. A 178:1–40
    [Google Scholar]
86. Quarini J. 2002. Ice-pigging to reduce and remove fouling and to achieve clean-in-place. Appl. Therm. Eng. 22:747–53
    [Google Scholar]
87. Raeini AQ, Bijeljic B, Blunt MJ 2015. Modelling capillary trapping using finite-volume simulation of two-phase flow directly on micro-CT images. Adv. Water Res. 83:102–10
    [Google Scholar]
88. Rosen MJ, Kunjappu JT. 2012. Surfactants and Interfacial Phenomena Hoboken, NJ: Wiley. , 4th ed..
89. Sahu KC, Ding H, Valluri P, Matar OK 2009. Linear stability analysis and numerical simulation of miscible two-layer channel flow. Phys. Fluids 21:042104
    [Google Scholar]
90. Schleizer AD, Bonnecaze RT. 1999. Displacement of a two-dimensional immiscible droplet adhering to a wall in shear and pressure-driven flows. J. Fluid Mech. 383:29–54
    [Google Scholar]
91. Schott H. 1992. Swelling kinetics of polymers. J. Macromol. Sci. Phys. B 31:1–9
    [Google Scholar]
92. Sethi SK, Manik G. 2018. Recent progress in super hydrophobic/hydrophilic self-cleaning surfaces for various industrial applications: a review. Polym.-Plast. Technol. Eng. 57:1932–52
    [Google Scholar]
93. Shankar PN, Deshpande MD. 2000. Fluid mechanics in the driven cavity. Annu. Rev. Fluid Mech. 32:93–136
    [Google Scholar]
94. Sharma MM, Chamoun H, Sita Rama Sarma DSH, Schechter RS 1992. Factors controlling the hydrodyamic detachment of particles from surface. J. Colloid Interface Sci. 149:121–34
    [Google Scholar]
95. Sharp DH. 1984. An overview of Rayleigh–Taylor instability. Physica D 12:3–18
    [Google Scholar]
96. Shin S, Warren PB, Stone HA 2018. Cleaning by surfactant gradients: particulate removal from porous materials and the significance of rinsing in laundry detergency. Phys. Rev. Appl. 9:034012
    [Google Scholar]
97. Smith ER, Theodorakis PE, Craster RV, Matar OK 2018. Moving contact lines: linking molecular dynamics and continuum-scale modeling. Langmuir 34:12501–18
    [Google Scholar]
98. Snoeijer JH, Andreotti B. 2013. Moving contact lines: scales, regimes, and dynamical transitions. Annu. Rev. Fluid Mech. 45:269–92
    [Google Scholar]
99. Soltani M, Ahmadi G. 2012. On particle adhesion and removal mechanisms in turbulent flows. J. Adhes. Sci. Technol. 8:763–85
    [Google Scholar]
100. Sui Y, Ding H, Spelt PDM 2014. Numerical simulations of flows with moving contact lines. Annu. Rev. Fluid Mech. 46:97–119
     [Google Scholar]
101. Taghavi SM. 2018. A two-layer model for buoyant displacement flows in a channel with wall slip. J. Fluid Mech. 852:602–40
     [Google Scholar]
102. Tatekura M, Watanabe M, Kobayashi K, Sanada T 2018. Pressure generated at the instant of impact between a liquid droplet and solid surface. R. Soc. Open Sci. 5:181101
     [Google Scholar]
103. Thampi SP, Pagonabarraga I, Adhikari R, Govindarajan R 2016. Universal evolution of a viscous-capillary spreading drop. Soft Matter 12:6073–78
     [Google Scholar]
104. Theofanous TG. 2011. Aerobreakup of Newtonian and viscoelastic liquids. Annu. Rev. Fluid Mech. 43:661–90
     [Google Scholar]
105. Tsiartas PC, Flanagin LW, Henderson CL, Hinsberg WD, Sanchez IC et al. 1997. The mechanism of phenolic polymer dissolution: a new perspective. Macromolecules 30:4656–64
     [Google Scholar]
106. Vaezi S. 2015. Experimental investigation of elastic properties effects on viscous fingering instability Master's Thesis, Shahrood Univ. Technol., Shahrood Iran:
107. Walker TW, Hsu TT, Frank CW, Fuller GG 2012. Role of shear-thinning on the dynamics of rinsing flow by an impinging jet. Phys. Fluids 24:093102
     [Google Scholar]
108. Wang S, Li Z, Liu B, Zhang X, Yang Q 2015. Molecular mechanisms for surfactant-aided oil removal from a solid surface. Appl. Surf. Sci. 359:98–105
     [Google Scholar]
109. Wilson DI. 2005. Challenges in cleaning: recent developments and future prospects. Heat Transf. Eng. 26:51–59
     [Google Scholar]
110. Wooding RA, Morel-Seytoux HJ. 1976. Multiphase fluid flow through porous media. Annu. Rev. Fluid Mech. 8:233–74
     [Google Scholar]
111. Xin H, Chen XD, Ozkan N 2004. Removal of a model protein foulant from metal surface. AIChE J 50:1961–73
     [Google Scholar]
112. Yan JF, Sáez AE, Grant CS 1997. Removal of oil films from stainless steel tubes. AIChE J 43:251–59
     [Google Scholar]
113. Yarin AL. 2006. Drop impact dynamics: splashing, spreading, receding, bouncing. Annu. Rev. Fluid Mech. 38:159–92
     [Google Scholar]
114. Yazdi AA, Norouzi M. 2018. Numerical study of Saffman–Taylor instability in immiscible nonlinear viscoelastic flows. Rheol. Acta 57:575–89
     [Google Scholar]
115. Yeckel A, Middleman S, Klumb LA 1990. The removal of thin liquid films from periodically grooved surfaces by an impinging jet. Chem. Eng. Commun. 96:69–79
     [Google Scholar]
116. Yeckel JF, Strong L, Middleman S 1994. Viscous film flow in the stagnation region of the jet impinging on planar surface. AIChE J 40:1611–17
     [Google Scholar]
117. Yih CS. 1967. Instability due to viscosity stratification. J. Fluid Mech. 27:337–52
     [Google Scholar]
118. Zhao B, MacMinn CW, Juanes R 2016. Wettability control on multiphase flow in patterned microfluidics. PNAS 113:10251–56
     [Google Scholar]
119. Zohourkari I, Zohoor M, Annoni M 2014. Investigation of the effects of machining parameters on material removal rate in abrasive waterjet turning. Adv. Mech. Eng. 6:624203
     [Google Scholar]