1932

Abstract

In additively manufactured (AM) metallic materials, the fundamental interrelationships that exist between composition, processing, and microstructure govern these materials’ properties and potential improvements or reductions in performance. For example, by using AM, it is possible to achieve highly desirable microstructural features (e.g., highly refined precipitates) that could not otherwise be achieved by using conventional approaches. Simultaneously, opportunities exist to manage macro-level microstructural characteristics such as residual stress, porosity, and texture, the last of which might be desirable. To predictably realize optimal microstructures, it is necessary to establish a framework that integrates processing variables, alloy composition, and the resulting microstructure. Although such a framework is largely lacking for AM metallic materials, the basic scientific components of the framework exist in literature. This review considers these key components and presents them in a manner that highlights key interdependencies that would form an integrated framework to engineer microstructures using AM.

Loading

Article metrics loading...

/content/journals/10.1146/annurev-matsci-070115-031816
2016-07-01
2024-12-02
Loading full text...

Full text loading...

/deliver/fulltext/matsci/46/1/annurev-matsci-070115-031816.html?itemId=/content/journals/10.1146/annurev-matsci-070115-031816&mimeType=html&fmt=ahah

Literature Cited

  1. Frazier WE.1.  2014. Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23:1917–28 [Google Scholar]
  2. Melchels FP, Domingos MA, Klein TJ, Malda J, Bartolo PJ, Hutmacher DW. 2.  2012. Additive manufacturing of tissues and organs. Prog. Polym. Sci. 37:1079–104 [Google Scholar]
  3. Vaezi M, Seitz H, Yang S. 3.  2013. A review on 3D micro-additive manufacturing technologies. Int. J. Adv. Manuf. Technol. 67:1721–54 [Google Scholar]
  4. Bikas H, Stavropoulos P, Chryssolouris G. 4.  2015. Additive manufacturing methods and modelling approaches: a critical review. Int. J. Adv. Manuf. Technol. 83389–405 [Google Scholar]
  5. Denlinger ER, Irwin J, Michaleris P. 5.  2014. Thermomechanical modeling of additive manufacturing large parts. J. Manuf. Sci. Eng. 136:061007 [Google Scholar]
  6. Michaleris P.6.  2014. Modeling metal deposition in heat transfer analyses of additive manufacturing processes. Finite Elem. Anal. Des. 86:51–60 [Google Scholar]
  7. Zhang L, Michaleris P. 7.  2004. Investigation of Lagrangian and Eulerian finite element methods for modeling the laser forming process. Finite Elem. Anal. Des. 40:383–405 [Google Scholar]
  8. Ding J, Colegrove P, Mehnen J, Williams S, Wang F, Almeida PS. 8.  2014. A computationally efficient finite element model of wire and arc additive manufacture. Int. J. Adv. Manuf. Technol. 70:227–36 [Google Scholar]
  9. Pinkerton AJ, Li L. 9.  2004. Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances. J. Phys. D 37:1885–95 [Google Scholar]
  10. Zhao J, Zhang B, Li X, Li R. 10.  2015. Effects of metal-vapor jet force on the physical behavior of melting wire transfer in electron beam additive manufacturing. J. Mater. Process. Technol. 220:243–50Provides details of melt pool physics, including the importance of the vapor, in additive manufacturing. [Google Scholar]
  11. Han L, Liou FW, Musti S. 11.  2005. Thermal behavior and geometry model of melt pool in laser material process. J. Heat Transf. 127:1005–14 [Google Scholar]
  12. Pinkerton A, Li L. 12.  2004. An analytical model of energy distribution in laser direct metal deposition. Proc. Inst. Mech. Eng. B 218:363–74 [Google Scholar]
  13. Zhou X, Wang D, Liu X, Zhang D, Qu S. 13.  et al. 2015. 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT. Acta Mater. 98:1–16 [Google Scholar]
  14. Heinl P, Müller L, Körner C, Singer RF, Müller FA. 14.  2008. Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater. 4:1536–44 [Google Scholar]
  15. Attar H, Löber L, Funk A, Calin M, Zhang L. 15.  et al. 2015. Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting. Mater. Sci. Eng. A 625:350–56 [Google Scholar]
  16. Sears JW.16.  2002. The effects of processing parameters on microstructure and properties of laser deposited PM alloy 690N2 powder Rep., Lockheed Martin [Google Scholar]
  17. Collins PC.17.  2004. A combinatorial approach to the development of composition-microstructure-property relationships in titanium alloys using directed laser deposition PhD Thesis, Dep. Mater. Sci. Eng., Ohio State Univ. [Google Scholar]
  18. Thijs L, Verhaeghe F, Craeghs T, Van Humbeeck J, Kruth J-P. 18.  2010. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Mater. 58:3303–12Discusses unusual microstructural features, including the zigzag pattern. [Google Scholar]
  19. Sun H, Flores K. 19.  2010. Microstructural analysis of a laser-processed Zr-based bulk metallic glass. Metall. Mater. Trans. A 41:1752–57 [Google Scholar]
  20. Vandenbroucke B, Kruth J-P. 20.  2007. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts. Rapid Prototyp. J. 13:196–203 [Google Scholar]
  21. Chlebus E, Kuźnicka B, Dziedzic R, Kurzynowski T. 21.  2015. Titanium alloyed with rhenium by selective laser melting. Mater. Sci. Eng. A 620:155–63 [Google Scholar]
  22. Tang H, Yang G, Jia W, He W, Lu S, Qian M. 22.  2015. Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting. Mater. Sci. Eng. A 636:103–7 [Google Scholar]
  23. Schwendner KI, Banerjee R, Collins PC, Brice CA, Fraser HL. 23.  2001. Direct laser deposition of alloys from elemental powder blends. Scr. Mater. 45:1123–29 [Google Scholar]
  24. Collins P, Banerjee R, Fraser H. 24.  2003. The influence of the enthalpy of mixing during the laser deposition of complex titanium alloys using elemental blends. Scr. Mater. 48:1445–50 [Google Scholar]
  25. Qiu C, Adkins NJ, Attallah MM. 25.  2013. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V. Mater. Sci. Eng. A 578:230–39 [Google Scholar]
  26. Panwisawas C, Qiu C, Sovani Y, Brooks J, Attallah M, Basoalto H. 26.  2015. On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting. Scr. Mater. 105:14–17 [Google Scholar]
  27. Gong H, Rafi K, Gu H, Starr T, Stucker B. 27.  2014. Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes. Addit. Manuf. 1:87–98 [Google Scholar]
  28. Attar H, Calin M, Zhang L, Scudino S, Eckert J. 28.  2014. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium. Mater. Sci. Eng. A 593:170–77 [Google Scholar]
  29. Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J. 29.  1995. Direct selective laser sintering of metals. Rapid Prototyp. J. 1:26–36 [Google Scholar]
  30. Yadroitsev I, Bertrand P, Smurov I. 30.  2007. Parametric analysis of the selective laser melting process. Appl. Surf. Sci. 253:8064–69 [Google Scholar]
  31. Zekovic S, Dwivedi R, Kovacevic R. 31.  2007. Numerical simulation and experimental investigation of gas–powder flow from radially symmetrical nozzles in laser-based direct metal deposition. Int. J. Mach. Tools Manuf. 47:112–23 [Google Scholar]
  32. Petrov P, Georgiev C, Petrov G. 32.  1998. Experimental investigation of weld pool formation in electron beam welding. Vacuum 51:339–43 [Google Scholar]
  33. Khairallah SA, Anderson A. 33.  2014. Mesoscopic simulation model of selective laser melting of stainless steel powder. J. Mater. Process. Technol. 214:2627–36 [Google Scholar]
  34. King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW. 34.  et al. 2014. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J. Mater. Process. Technol. 214:2915–25 [Google Scholar]
  35. Gu D, Meiners W, Wissenbach K, Poprawe R. 35.  2012. Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int. Mater. Rev. 57:133–64 [Google Scholar]
  36. Brandl E, Schoberth A, Leyens C. 36.  2012. Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater. Sci. Eng. A 532:295–307 [Google Scholar]
  37. Sochalski-Kolbus L, Payzant E, Cornwell P, Watkins T, Babu S. 37.  et al. 2015. Comparison of residual stresses in Inconel 718 simple parts made by electron beam melting and direct laser metal sintering. Metall. Mater. Trans. A 46:1419–32 [Google Scholar]
  38. Denlinger ER, Heigel JC, Michaleris P, Palmer T. 38.  2015. Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. J. Mater. Process. Technol. 215:123–31Observes residual stresses in different metallic systems. [Google Scholar]
  39. Mercelis P, Kruth J-P. 39.  2006. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp. J. 12:254–65 [Google Scholar]
  40. Vilaro T, Colin C, Bartout J-D, Nazé L, Sennour M. 40.  2012. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy. Mater. Sci. Eng. A 534:446–51 [Google Scholar]
  41. Brice CA, Hofmeister WH. 41.  2013. Determination of bulk residual stresses in electron beam additive-manufactured aluminum. Metall. Mater. Trans. A 44:5147–53 [Google Scholar]
  42. Roberts IA, Wang CJ, Esterlein R, Stanford M, Mynors DJ. 42.  2009. A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. Int. J. Mach. Tools Manuf. 49:916–23 [Google Scholar]
  43. Withers P, Bhadeshia H. 43.  2001. Residual stress. Part 1. Measurement techniques. Mater. Sci. Technol. 17:355–65 [Google Scholar]
  44. Withers P, Bhadeshia H. 44.  2001. Residual stress. Part 2. Nature and origins. Mater. Sci. Technol. 17:366–75 [Google Scholar]
  45. Bermingham MJ, Kent D, Zhan H, StJohn DH, Dargusch MS. 45.  2015. Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Mater. 91:289–303Modifies grain size/morphology through compositional variation influencing constitutional supercooling. [Google Scholar]
  46. Vilaro T, Colin C, Bartout J-D. 46.  2011. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall. Mater. Trans. A 42:3190–99 [Google Scholar]
  47. Wu X, Sharman R, Mei J, Voice W. 47.  2002. Direct laser fabrication and microstructure of a burn-resistant Ti alloy. Mater. Des. 23:239–47 [Google Scholar]
  48. Qiu C, Ravi G, Attallah MM. 48.  2015. Microstructural control during direct laser deposition of a β-titanium alloy. Mater. Des. 81:21–30 [Google Scholar]
  49. Kunze K, Etter T, Grässlin J, Shklover V. 49.  2015. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM). Mater. Sci. Eng. A 620:213–22 [Google Scholar]
  50. Dinda G, Dasgupta A, Mazumder J. 50.  2012. Texture control during laser deposition of nickel-based superalloy. Scr. Mater. 67:503–6 [Google Scholar]
  51. Bi G, Sun C-N, Chen H-c, Ng FL, Ma CCK. 51.  2014. Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing. Mater. Des. 60:401–8 [Google Scholar]
  52. Joseph J, Jarvis T, Wu X, Stanford N, Hodgson P, Fabijanic DM. 52.  2015. Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys. Mater. Sci. Eng. A 633:184–93 [Google Scholar]
  53. Sun S-H, Koizumi Y, Kurosu S, Li Y-P, Matsumoto H, Chiba A. 53.  2014. Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting. Acta Mater. 64:154–68 [Google Scholar]
  54. Chalmers B.54.  1964. Principles of Solidification New York: Wiley [Google Scholar]
  55. Morris L, Winegard W. 55.  1969. Segregation and morphology of cells during freezing. J. Inst. Met. 97:220–22 [Google Scholar]
  56. Flemings MC.56.  1974. Solidification processing. Metall. Trans. 5:2121–34 [Google Scholar]
  57. Ferry M.57.  2006. Direct Strip Casting of Metals and Alloys: Processing, Microstructure and Properties Cambridge, UK: Woodhead [Google Scholar]
  58. Liu J, Davidchack R, Dong H. 58.  2013. Molecular dynamics calculation of solid–liquid interfacial free energy and its anisotropy during iron solidification. Comput. Mater. Sci. 74:92–100 [Google Scholar]
  59. Boettinger W, Coriell S, Greer A, Karma A, Kurz W. 59.  et al. 2000. Solidification microstructures: recent developments, future directions. Acta Mater. 48:43–70 [Google Scholar]
  60. Henry S.60.  1943. Study of the nucleation and growth of feathery grains in aluminum alloys. PhD Thesis, EPFL [Google Scholar]
  61. Henry S, Rappaz M. 61.  2000. Twinned feathery grains and related morphologies in aluminum alloys. Proc. Mater. Sci. Forum 329:65–72 [Google Scholar]
  62. Liu C-M, Wang H-M, Tian X-J, Tang H-B, Liu D. 62.  2013. Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy. Mater. Sci. Eng. A 586:323–29 [Google Scholar]
  63. Ren H, Liu D, Tang H, Tian X, Zhu Y, Wang H. 63.  2014. Microstructure and mechanical properties of a graded structural material. Mater. Sci. Eng. A 611:362–69 [Google Scholar]
  64. Bontha S, Klingbeil NW, Kobryn PA, Fraser HL. 64.  2009. Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures. Mater. Sci. Eng. A 513:311–18 [Google Scholar]
  65. Davis JE, Klingbeil NW, Bontha S. 65.  2009. Effect of free-edges on melt pool geometry and solidification microstructure in beam-based fabrication of thin-wall structures. Proc. Solid Freeform Fabrication Symposium320–31 [Google Scholar]
  66. Davis JE, Klingbeil NW, Bontha S. 66.  2009. Effect of free-edges on melt pool geometry and solidification microstructure in beam-based fabrication of bulky 3-D structures. Proc. Solid Freeform Fabrication Symposium230–41 [Google Scholar]
  67. Kobryn P, Semiatin S. 67.  2003. Microstructure and texture evolution during solidification processing of Ti–6Al–4V. J. Mater. Process. Technol. 135:330–39 [Google Scholar]
  68. Fukumoto S, Kurz W. 68.  1999. Solidification phase and microstructure selection maps for Fe-Cr-Ni alloys. ISIJ Int. 39:1270–79 [Google Scholar]
  69. Hunziker O, Vandyoussefi M, Kurz W. 69.  1998. Phase and microstructure selection in peritectic alloys close to the limit of constitutional undercooling. Acta Mater. 46:6325–36 [Google Scholar]
  70. Klingbeil N, Bontha S, Brown C, Gaddam D, Kobryn P. 70.  et al. 2004. Effects of process variables and size scale on solidification microstructure in laser-based solid freeform fabrication of Ti-6Al-4V Doc., DTIC [Google Scholar]
  71. Yin H, Felicelli S. 71.  2010. Dendrite growth simulation during solidification in the LENS process. Acta Mater. 58:1455–65 [Google Scholar]
  72. Kobryn P, Semiatin S. 72.  2001. Mechanical properties of laser-deposited Ti-6Al-4V. Proc. Solid Freeform Fabrication Symposium6–8 [Google Scholar]
  73. Collins P, Haden C, Ghamarian I, Hayes B, Ales T. 73.  et al. 2014. Progress toward an integration of process–structure–property–performance models for “three-dimensional (3-D) printing” of titanium alloys. JOM 66:1299–309 [Google Scholar]
  74. Carroll BE, Palmer TA, Beese AM. 74.  2015. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing. Acta Mater. 87:309–20 [Google Scholar]
  75. Jiang W, Guan H, Hu Z. 75.  1999. Effects of heat treatment on microstructures and mechanical properties of a directionally solidified cobalt-base superalloy. Mater. Sci. Eng. A 271:101–8 [Google Scholar]
  76. Banerjee R, Nag S, Samuel S, Fraser H. 76.  2006. Laser-deposited Ti-Nb-Zr-Ta orthopedic alloys. J. Biomed. Mater. Res. A 78:298–305Shows deposition of a low-modulus metallic alloy for potential incorporation into biomedical implants. [Google Scholar]
  77. Nag S, Samuel S, Puthucode A, Banerjee R. 77.  2009. Characterization of novel borides in Ti–Nb–Zr–Ta + 2B metal-matrix composites. Mater. Charact. 60:106–13 [Google Scholar]
  78. Bermingham M, McDonald S, Dargusch M, StJohn D. 78.  2008. Grain-refinement mechanisms in titanium alloys. J. Mater. Res. 23:97–104 [Google Scholar]
  79. Wang T, Zhu Y, Zhang S, Tang H, Wang H. 79.  2015. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing. J. Alloys Compd. 632:505–13 [Google Scholar]
  80. Taminger KM, Hafley RA. 80.  2003. Electron beam freeform fabrication: a rapid metal deposition process. Proc. 3rd Annual Automotive Composites Conference9–10 [Google Scholar]
  81. Spittle J.81.  2006. Columnar to equiaxed grain transition in as solidified alloys. Int. Mater. Rev. 51:247–69 [Google Scholar]
  82. Bermingham M, McDonald S, StJohn D, Dargusch M. 82.  2009. Beryllium as a grain refiner in titanium alloys. J. Alloys Compd. 481:L20–23 [Google Scholar]
  83. Easton M, StJohn D. 83.  2001. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Mater. 49:1867–78 [Google Scholar]
  84. StJohn D, Prasad A, Easton M, Qian M. 84.  2015. The contribution of constitutional supercooling to nucleation and grain formation. Metall. Mater. Trans. A 46:4868–85 [Google Scholar]
  85. Kurz W, Bezencon C, Gäumann M. 85.  2001. Columnar to equiaxed transition in solidification processing. Sci. Technol. Adv. Mater. 2:185–91 [Google Scholar]
  86. Wang F, Mei J, Wu X. 86.  2006. Microstructure study of direct laser fabricated Ti alloys using powder and wire. Appl. Surf. Sci. 253:1424–30 [Google Scholar]
  87. Bryan DJ.87.  2002. Development of a burn-resistant titanium alloy through the laser deposition of elementally blended powders Thesis, Dep. Mater. Sci. Eng., Ohio State Univ. [Google Scholar]
  88. Dehoff RR, Kirka MM, Sames WJ, Bilheux H, Tremsin AS. 88.  et al. 2015. Site specific control of crystallographic grain orientation through electron beam additive manufacturing. Mater. Sci. Technol. 31:931–38 [Google Scholar]
  89. Wu X, Xu B, Hong Y. 89.  2002. Synthesis of thick Ni66Cr5Mo4Zr6P15B4 amorphous alloy coating and large glass-forming ability by laser cladding. Mater. Lett. 56:838–41 [Google Scholar]
  90. Sun H, Flores K. 90.  2008. Laser deposition of a Cu-based metallic glass powder on a Zr-based glass substrate. J. Mater. Res. 23:2692–703Reports on the efforts to deposit bulk-metallic glasses using additive manufacturing. [Google Scholar]
  91. Yang G, Lin X, Liu F, Hu Q, Ma L. 91.  et al. 2012. Laser solid forming Zr-based bulk metallic glass. Intermetallics 22:110–15 [Google Scholar]
  92. Xu W, Brandt M, Sun S, Elambasseril J, Liu Q. 92.  et al. 2015. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition. Acta Mater. 85:74–84 [Google Scholar]
  93. Ma Y, Cuiuri D, Hoye N, Li H, Pan Z. 93.  2015. The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding. Mater. Sci. Eng. A 631:230–40 [Google Scholar]
  94. Wang F, Williams S, Colegrove P, Antonysamy AA. 94.  2013. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V. Metall. Mater. Trans. A 44:968–77 [Google Scholar]
  95. Dinda G, Dasgupta A, Mazumder J. 95.  2009. Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability. Mater. Sci. Eng. A 509:98–104 [Google Scholar]
  96. Nahmany M, Rosenthal I, Benishti I, Frage N, Stern A. 96.  2015. Electron beam welding of AlSi10Mg workpieces produced by selected laser melting additive manufacturing technology. Addit. Manuf. 8:63–70 [Google Scholar]
  97. Amato K, Gaytan S, Murr L, Martinez E, Shindo P. 97.  et al. 2012. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting. Acta Mater. 60:2229–39 [Google Scholar]
  98. Murr L, Martinez E, Pan X, Gaytan S, Castro J. 98.  et al. 2013. Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting. Acta Mater. 61:4289–96 [Google Scholar]
  99. Tomus D, Qian M, Brice CA, Muddle BC. 99.  2010. Electron beam processing of Al–2Sc alloy for enhanced precipitation hardening. Scr. Mater. 63:151–54Extends solid-solution and reduced partitioning in additive manufacturing, resulting in highly refined precipitates. [Google Scholar]
  100. Banerjee R, Genc A, Hill D, Collins P, Fraser H. 100.  2005. Nanoscale TiB precipitates in laser deposited Ti-matrix composites. Scr. Mater. 53:1433–37 [Google Scholar]
  101. Brice C, Fraser H. 101.  2003. Characterization of Ti-Al-Er alloy produced via direct laser deposition. J. Mater. Sci. 38:1517–21 [Google Scholar]
  102. Banerjee R, Bhattacharyya D, Collins P, Viswanathan G, Fraser H. 102.  2004. Precipitation of grain boundary α in a laser deposited compositionally graded Ti–8Al–xV alloy—an orientation microscopy study. Acta Mater. 52:377–85 [Google Scholar]
  103. Ramirez D, Murr L, Martinez E, Hernandez D, Martinez J. 103.  et al. 2011. Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting. Acta Mater. 59:4088–99 [Google Scholar]
  104. Vrancken B, Thijs L, Kruth J-P, Van Humbeeck J. 104.  2014. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting. Acta Mater. 68:150–58 [Google Scholar]
  105. Nag S, Banerjee R, Stechschulte J, Fraser H. 105.  2005. Comparison of microstructural evolution in Ti-Mo-Zr-Fe and Ti-15Mo biocompatible alloys. J. Mater. Sci. Mater. Med. 16:679–85 [Google Scholar]
  106. Banerjee R, Nag S, Fraser H. 106.  2005. A novel combinatorial approach to the development of beta titanium alloys for orthopaedic implants. Mater. Sci. Eng. C 25:282–89 [Google Scholar]
  107. Powell A, Pal U, Van Den Avyle J, Damkroger B, Szekely J. 107.  1997. Analysis of multicomponent evaporation in electron beam melting and refining of titanium alloys. Metall. Mater. Trans. B 28:1227–39 [Google Scholar]
  108. Gaytan S, Murr L, Medina F, Martinez E, Lopez M, Wicker R. 108.  2009. Advanced metal powder based manufacturing of complex components by electron beam melting. Mater. Sci. Technol. 24:180–90 [Google Scholar]
  109. Sato Y, Kuwana T. 109.  1995. Oxygen absorption in iron and steel weld metal. ISIJ Int. 35:1162–69 [Google Scholar]
  110. Semiatin S, Ivanchenko V, Ivasishin O. 111.  2004. Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys. Metall. Mater. Trans. B 35:235–45 [Google Scholar]
  111. Langmuir I.111.  1913. The vapor pressure of metallic tungsten. Phys. Rev. 2:329–42Derives the Langmuir equation. [Google Scholar]
  112. Kelly S, Kampe S. 112.  2004. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds. Part II. Thermal modeling. Metall. Mater. Trans. A 35:1869–79 [Google Scholar]
  113. Hofmeister W, Griffith M. 113.  2001. Solidification in direct metal deposition by LENS processing. JOM 53:30–34 [Google Scholar]
  114. DuPont J.114.  1996. Solidification of an alloy 625 weld overlay. Metall. Mater. Trans. A 27:3612–20 [Google Scholar]
  115. Yu C.115.  2014. Ti powder sintering: impurity, sintering atmosphere and alloy design PhD Thesis, Dep. Chem. Mater. Eng., Univ. Auckland [Google Scholar]
  116. Aziz M.116.  1982. Model for solute redistribution during rapid solidification. J. Appl. Phys. 53:1158–68Discusses solute redistribution during rapid solidification, which has a strong tie to additive manufacturing. [Google Scholar]
  117. Banerjee R, Collins PC, Fraser HL. 117.  2002. Laser deposition of in situ Ti–TiB composites. Adv. Eng. Mater. 4:847–51 [Google Scholar]
  118. Banerjee R, Collins P, Bhattacharyya D, Banerjee S, Fraser H. 118.  2003. Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys. Acta Mater. 51:3277–92 [Google Scholar]
  119. Collins P, Banerjee R, Banerjee S, Fraser H. 119.  2003. Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys. Mater. Sci. Eng. A 352:118–28 [Google Scholar]
  120. Samimi P, Liu Y, Ghamarian I, Collins P. 120.  2014. A novel tool to assess the influence of alloy composition on the oxidation behavior and concurrent oxygen-induced phase transformations for binary Ti–xMo alloys at 650°C. Corros. Sci. 89:295–306 [Google Scholar]
  121. Samimi P, Liu Y, Ghamarian I, Song J, Collins P. 121.  2014. New observations of a nanoscaled pseudomorphic bcc Co phase in bulk Co–Al–(W, Ta) superalloys. Acta Mater. 69:92–104 [Google Scholar]
  122. Samimi P, Liu Y, Ghamarian I, Brice DA, Collins PC. 122.  2015. A new combinatorial approach to assess the influence of alloy composition on the oxidation behavior and concurrent oxygen-induced phase transformations for binary Ti–xCr alloys at 650°C. Corros. Sci. 97:150–60 [Google Scholar]
  123. Lin X, Yue T, Yang H, Huang W. 123.  2005. Laser rapid forming of SS316L/Rene88DT graded material. Mater. Sci. Eng. A 391:325–36 [Google Scholar]
  124. Lin X, Yue T, Yang H, Huang W. 124.  2006. Microstructure and phase evolution in laser rapid forming of a functionally graded Ti–Rene88DT alloy. Acta Mater. 54:1901–15 [Google Scholar]
  125. Liang Y-J, Liu D, Wang H-M. 125.  2014. Microstructure and mechanical behavior of commercial purity Ti/Ti–6Al–2Zr–1Mo–1V structurally graded material fabricated by laser additive manufacturing. Scr. Mater. 74:80–83 [Google Scholar]
  126. Liu J, Li L. 126.  2005. Effects of powder concentration distribution on fabrication of thin-wall parts in coaxial laser cladding. Opt. Laser Technol. 37:287–92 [Google Scholar]
  127. Thompson SM, Bian L, Shamsaei N, Yadollahi A. 127.  2015. An overview of direct laser deposition for additive manufacturing. Part I. Transport phenomena, modeling and diagnostics. Addit. Manuf. 8:36–62 [Google Scholar]
  128. Das S.128.  2003. Physical aspects of process control in selective laser sintering of metals. Adv. Eng. Mater. 5:701–11 [Google Scholar]
  129. Antonysamy A, Meyer J, Prangnell P. 129.  2013. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti–6Al–4V by selective electron beam melting. Mater. Charact. 84:153–68 [Google Scholar]
  130. Pogson S, Fox P, O'Neill W, Sutcliffe CJ. 130.  2004. The direct metal laser remelting of copper and tool steel powders. Mater. Sci. Eng. A 386:453–59 [Google Scholar]
  131. Wang F, Williams S, Rush M. 131.  2001. Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy. Int. J. Adv. Manuf. Technol. 57:597–603 [Google Scholar]
  132. Hong C, Gu D, Dai D, Alkhayat M, Urban W. 132.  2015. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: tailored microstructures and enhanced performance. Mater. Sci. Eng. A 635:118–28 [Google Scholar]
/content/journals/10.1146/annurev-matsci-070115-031816
Loading
/content/journals/10.1146/annurev-matsci-070115-031816
Loading

Data & Media loading...

  • Article Type: Review Article
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error